it will be the sevice indicator miles to the next service it in minus number as it hasnt been reset
SERVICE REMINDER
l Show the distance to the next maintenance.
l For the first 5 seconds after ignition switch ON, the odo meter
displays distance to service and the wrench
symbol. When the distance to service comes to zero, a minus sign
is used and wrench symbol flashes.
Setting Procedure
The distance can be changed manually.
1. Ignition switch ON.
2. By pressing and holding the clock switch (clock switch is RH
switch in meter) about 3 seconds while the
maintenance distance and wrench symbol are displayed (about 5
seconds after turning on the ignition).
3. It comes to setting mode. The maintenance distance and wrench
symbol will flash.
4. While these are flashing, press the clock switch to display the
current maintenance distance.
5. Press the clock switch again to increase the setting distance
by 500 miles(1000km) increments.
6. The maximum setting is 31,500 miles(63000 km). Pressing the
clock switch one more time after this will
return the setting to 0.
7. When the setting procedure is complete, do not touch the switch
for 5 seconds (until odo meter: ON,
wrench symbol: OFF).
Default Values
The default service interval depends on engine type and
handle.
The following values are used.
CR engine 12500
Miles
HR engine 18500 Miles
K9K engine 12500 Miles
Edited by: flash22
