Nissan Note Owners Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter · #1 ·
Hi everyone. Hope you had a good Easter.Has anyone ever replaced the cover of the cubby?
I have a scratched one on the (new) fascia for my Connect, and want to replace it with another one I have.
The spring is held in by a single screw on each side.
Is it easy enough to remove just the cover? The hinge seems to be in the form of a hollow pin (like a very short length of metal tubing).

Thanks in advance.
 

·
Premium Member
Joined
·
7,177 Posts
undo the screws that holds the springs and it just unclips the lid is one part as the top is glued to the inner part put you can leaver them apart you just need to stick/bond them back together

I will get a pic up for you later today

ps. sorry I haven't had time to do your lead but will pm you later
 

·
Premium Member
Joined
·
7,177 Posts
ideally you need to remove the cubby from the surround (4 screws)

undo the 2 springs and from the top of the cubby leaver in between the hinge and the cubby its self it only held in place by 3-4mm shoulder on the lid hinge pin
















Edited by: flash22
 
1 - 3 of 3 Posts
Top